FL02 Solvent-free Epoxy coating floor sealer(Primer and Topcoat) with best selling

Product Description:

This floor coating product is a high-performance two-component solvent-free amine-cured epoxy coating. The ratio of component A to component B is 5:3. This product is a self-leveling product, making the surface seamless, wear-resistant, impact-resistant, chemical-resistant and anti-slip, suitable for construction on certified primers on concrete substrates.

It can be used as a leveling material in local undulating or slightly pitted substrate defects. If there is a thickness requirement greater than 2mm, quartz sand can be added to the topcoat and scraped for 1-2 times before applying the topcoat. This product complies with the regulations of the US Food and Drug Administration (FDA).

FL02  Solvent-free Epoxy coating floor sealer (Primer and Topcoat)

Product Description:

This product is a high-performance two-component solvent-free amine-cured epoxy coating. The ratio of component A to component B is 5:3. This product is a self-leveling product, making the surface seamless, wear-resistant, impact-resistant, chemical-resistant and anti-slip, suitable for construction on certified primers on concrete substrates.

It can be used as a leveling material in local undulating or slightly pitted substrate defects. If there is a thickness requirement greater than 2mm, quartz sand can be added to the topcoat and scraped for 1-2 times before applying the topcoat. This product complies with the regulations of the US Food and Drug Administration (FDA).

 

There are two models of products: primer and topcoat.

FL02 Primer:  Solvent-free Epoxy coating floor sealer Primer

FL02 Topcoat:  Solvent-free Epoxy coating self-leveling floor Topcoat

 

Application use:

It is specially designed for industrial floors, laboratories, hospitals, food and beverage factories, kitchens, high-tech production equipment factories, dairy factories, warehouses, loading and unloading areas, factories and hangars. It is suitable for various floors that are subjected to different degrees of mechanical impact and chemical contact.

 

Product performance parameters:

Model FL02 Primer FL02 Topcoat
Gloss High gloss High gloss
Popular colors Transparent Green,Gray, Customized colors
Solids by volume 98 ±2% 98 ±2%
Density 1.1 kg/l 1.3 kg/l
Wet film thickness 40-50 μm 1000-1500 μm
Dry film thickness 40-50 μm 1000-1500 μm
Theoretical coating rate 25-20 ㎡/l 1-0.7 ㎡/l
Adhesion Grade 1 Grade 1
Impact resistance 50 kg / cm 50 kg / cm
Drying time / Temperature 15℃ 25℃ 35℃ 15℃ 25℃ 35℃
Surface dry (humidity 60%) 10h 4.5h 4h 10h 4.5h 4h
Hard dry (humidity 60%) 24h 12h 8h 24h 12h 8h

Reviews

There are no reviews yet.

Be the first to review “FL02 Solvent-free Epoxy coating floor sealer(Primer and Topcoat) with best selling”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Be the first to review “FL02 Solvent-free Epoxy coating floor sealer(Primer and Topcoat) with best selling”

Your email address will not be published. Required fields are marked *